Cementing Additives

International Drilling Chemicals offers the best range of Oilfield Chemicals and Drilling fluids. To enumerate, our range of Alkalinity Control chemicals include the following:

SILICA FLOUR

Function:

Silica Flour is finely ground silica sand used in oilwell HPHT cement whenever the cement will be exposed to temperatures of 230⁰F to 400⁰F. It is typically found in Geothermal Energy Wells. Silica flour prevents the loss of strength, or retrogression, that oilwell cement would otherwise experience at these temperatures.

Silica flour is available in 120, 140, 200, 270 & 325 mesh.

SAPP

Function:

Efficient dispersant in low-weight freshwater muds used in uphole drilling and effective additive for the purpose of treating cement contamination and subsequently reduce viscosity.

CITRIC-ACID

Function:

Reduce pH and removes calcium to pretreat or remedy cement contamination, sequesters soluble iron in order to prevent polymer crosslinking in the drilling fluid system.

SODIUM-BICARBONATE

Function:

Used as a source of bicarbonate ions to precipitate & remove soluble calcium from water base fluids and ultimately reduce pH. As a result, provides effective treatment for cement contamination and deflocculates cement contaminated fluids.

SP-18L

Function:

It can be used in cement slurries at typical dosages of 0.2 to 1.0 gallons per sack of cement. To add, it is effective in all salt concentrations.

UCD-I

Function:

UCD-I can defoam through reducing the surface tension of the liquid. Additionally, it has various functions such as inhibiting foam, defoaming, and moreover perverting migrating of gas.

UFL-73A

Function:

UFL-73 A can control fluid loss through forming tight polymer film and enhancing viscosity of the water phase.

UFL-301

Function:

UFL-301 can enhance the viscosity of water phase in cement slurry and form aggregated chains of polymer in order to plug the pores in mud cake. Therefore, it can reduce the permeability of mud cake and control fluid loss.

UFL-301

Function:

UFL-302 can control fluid loss though forming tight polymer film and enhancing viscosity of the water phase

UFL-3S

Function:

UFL-3S formed the polymerization of the modified AMPS, low molecular weight amides, carboxyl acid. UFL-3S is a soluble polymer. Additionally, it consists of more functional groups has better anti-temperature and anti-salt ability.

UFL-110

Function:

UFL-110 Soluble polymer that consists of more functional groups. Furthermore, it has better anti-temperature and anti-salt ability

UFL-2S

Function:

UFL-2S can control fluid loss though forming tight polymer film and enhancing viscosity of the water phase. UFL-2S for Sea Water Cement Slurries. In addition, it is acclaimed for its pure and effective composition.

UDM-5S

Function:

UDM-5S is a double carboxylic acid group and sulfonate group reacted with tricalcium aluminate and silicate tricalcium. Through means of adsorption, chelation, wetting and dispersing, etc.

UGDL-9S

Function:

UGDL-9S belongs to the same series of liquid retarders that can absorb on the surfaces of the cement slurry hydrate to inhibit contact with water and chelate with Ca2+ in order to prevent crystal nucleus forming early. Therefore, it can retard thickening time.

UGMD-I

Function:

Most importantly, UGDM-I absorbs on the surfaces of cement hydrate to inhibit contact with water and on the surfaces of the crystal nucleus in order to prevent their increase. As a result, it can retard hydrating the cement slurry.

In conclusion, International Drilling Chemicals partners with major oil and gas companies worldwide. Moreover, we cater to our partners as manufacturers and suppliers in India for oilfield chemicals.