IDCTHIN

Used with synthetic-base mud systems, this thinner system reduces viscosity and gel strengths in the mud without the need for dilution or changing the synthetic/water ratio

IDCTONE

This dispersant is used in the IDCTONE organophilic, thermally stable, flat-rheology invert-emulsion drilling fluid system to reduce overall viscosity and gel strengths.

IDCTHIN-HT

This HT thinner is not affected by calcium contamination and high salt levels.

IDCPPD

IDCPPD will be dependent on the system to which they are to be applied and on the hydrocarbon profile of the crude. Field experience shows typical dose rates when applied to main export pipelines and topsides process streams to be in the region of 100-1000ppm. An effective dosing level from a laboratory test rarely correlates well with dose rates observed in the field and it is therefore recommended that the actual dose rate for products be substantially reduced during field application. It would be recommended that optimum dose levels be assessed in the field.

IDCPPD

IDCPPD will be dependent on the system to which they are to be applied and on the hydrocarbon profile of the crude. Field experience shows typical dose rates when applied to main export pipelines and topsides process streams to be in the region of 100-1000ppm. An effective dosing level from a laboratory test rarely correlates well with dose rates observed in the field and it is therefore recommended that the actual dose rate for products be substantially reduced during field application. It would be recommended that optimum dose levels be assessed in the field.

IDCCS

Controls rheology and reduce fluid loss for higher temperature muds, emulsifies oil, reduces flocculation and stabilizes water-base drilling fluids.

some other thinners and dispersants manufacturer are:

IDCFC Deflocculant

Multi-purpose deflocculant and gel-strength reducer, temperature stabilizer and filtration-control additive for use in all water-base systems. Exhibits superior deflocculating ability, even in the presence of contaminants and elevated temperatures.

IDCCF Deflocculant

Environmentally acceptable deflocculant and fluid loss additive in all types of water‐base systems. Exhibits superior deflocculating ability, even in the presence of contaminants and elevated temperatures.

IDCPPD8

IDCPPD 8 is a water soluble material that provides efficient depression of iron, copper and lead containing sulfide minerals in flotation processes. This product is the preferred depressant in primary molybdenum flotation operations for copper and iron sulfides. IDCPPD8 performance in copper-molybdenum separation circuits to depress copper from molybdenum in rougher and/or cleaner circuits

IDCPPD 50

IDCPPD 50 is a high activity asphaltene dispersant. IDCPPD 50is product keeps asphaltenes solublized and dispersed to  avoid reflocculation and reduce the size of particles. IDCPPD 50 is formulated to allow increase contact between solvent  and deposit even in the presence of water.

IDCPPD 50

IDCPPD 50 is a high activity asphaltene dispersant. IDCPPD 50is product keeps asphaltenes solublized and dispersed to  avoid reflocculation and reduce the size of particles. IDCPPD 50 is formulated to allow increase contact between solvent  and deposit even in the presence of water.

IDCK-LIG

IDCKLIG is used to increase soluble potassium for shale inhibition when chlorides from potassium chloride are undesirable. While it can be the sole source of potassium, IDCKLIG is more often used in combination with other potassium-base products such as causticized potassium lignite, chrome lignite and KOH.

IDCOSD

IDCOSD contains surface‐active agents (surfactant) and a stabilizer, The purpose of IDCOSD is quick removal of oil on surface by converting it in fine oil  in  water  emulsion,  which  is  rapidly  distributed  through  the  water  column through agitation and mixing  Oil  dispersed  effectively  into large  volume  of  seawater  is further  diluted  rapidly  by  turbulence and its concentration is  reduced  soon  to  back‐ground  levels.  The  objective  of  Oil  Spill  Dispersant  is  chemical  dispersion  of  Oil spillage and expose of larger area of oil attack by marine bacteria present in sea Water than the exposed area of  untreated slick. This is achieved when surface oil breaks into droplets by action of IDCOSD which on agitation disposes in to vertical water Column of sea. These droplets are rapidly biodegraded by marine bacteria.  Resurfacing  of  droplets  is  influenced  by  droplet  size,  density  of  seawater, depth of water column and viscosity of oil being treated. The smaller the droplets size the less chance of oil Resurfacing  and more rapid  the dilution of droplet  and  its  biodegradation  by  marine Bacteria and greater its anti-cohesive properties

IDCPPD100

IDCPPD 100 is a carboxylic copolymer used for various water treatment and industrial applications. It is highly effective as Dispersant and Scale Inhibitor in Industrial Water Treatment and Cooling Water Treatment as well as in all types of water-based formulations. It’s a low molecular weight polymer has the good anti-gelling capacity and so has best calcium trapping ability working over a wide range of pH, high hardness and temperature without precipitation. The product is non-phosphorus; non-foaming dispersant and has good environmental acceptability

IDCPURE

IDCPURE is a non-ionic bio dispersant for use in open recirculating systems. It improves penetration of chlorine and non-oxidizing biocides to better microbial control. IDCPURE has a slight foaming characteristic. IDCPURE non-toxic and non-polluting at use levels. IDCPURE helps to increase the effectiveness of chlorination and non-oxidizing biocides.

IDCDET DRS

IDCDET DRS is a concentrated Liquid blend of several highly active formulated chemicals which is used as a drilling mud detergent. The product finds application in all water based drilling fluid systems. IDCDET DRS reduces the surface tension and it is a powerful wetting agent. The reduction in surface tension promotes the setting of the mud pH and reduced the balling of shale cutting resulting in an increase in the penetration rate. IDCDET DRS acts as a good emulsifier and lowers the torque and drag.

Action: Contact for the best quality thinners and dispersants manufacturer in India.