Emulsifiers and Wetting Agents:

Our range of Emulsifier and Wetting Agents chemicals including the following:

IDCTONE

Impart viscosity and suspension properties to oil-base drilling fluids, for improving cutting-carrying capacity and to provide long-term suspension of weighting agents.

IDCTONE -PR

Function

IDCTONE-PR is used to impart viscosity and suspension properties to oil-based drilling fluids. Additionally, IDCTONE-PR is also used to gel oil drilling fluids for long-term suspension of weighting agents in drilling and packer fluids. IDCTONE-PR typically yields faster in comparison to IDCTONE-PR but will reach the same final viscosity. Therefore, IDCTONE-PR is usually preferred in mineral oil-based fluids. IDCTONE-PR is stable to 350°F (176°C). IDCTONE-PR should not be used in high performance clay-free oil-based drilling fluids.
IDCTONE -SD Standard grade Organophilic clay, Viscosifier and gelling agent.

IDCTONE -SDUNITONE -SD

Function

IDCTONE-SD is a high-temperature filtration control agent, acts synergistically with emulsifiers in conventional invert emulsion systems to enhance the overall emulsion and thermal stability. IDCTONE-SD typically yields faster than IDCTONE-SD but will reach the same final viscosity. Also, IDCTONE-SD is usually preferred in mineral oil-based fluids. IDCTONE-SD is stable to 350°F (176°C). IDCTONE-SD should not be used in high-performance clay-free oil-based drilling fluids.

IDCWELTONE

Function

High-temperature filtration control agent, act synergistically with emulsifiers in conventional invert emulsion systems to enhance the overall emulsion and thermal stability.

IDCPHALT

Function

IDCPHALT -HT HTHP filtration control, seal low-pressure and depleted formations. Also improves overall emulsion stability, thermal stability and suspension characteristics of oil-base mud.

PHALT-HT

Function

IDCPHALT -HT HTHP filtration control, seal low-pressure and depleted formations, Also, it improves overall emulsion stability, thermal stability and suspension characteristics of oil-base mud.

TANNIN-Q

Function

High-temperature filtration control additive for use in any oil- or synthetic-based mud systems with minimal effect on rheological properties of mud. Temperature stability is up to 500°F (260°C).

IDCMUL-P

Function

Provides excellent emulsion stability, secondary wetting, filtration control and contamination-resistance of oil mud system

IDCMUL-S

Function

Multifunctional additive serves as a secondary emulsifier, wetting agent and filtration control agent in oil mud systems.

IDCMUL-SBM

Function

IDCMUL SBM functions as a wetting agent and secondary emulsifier when used in conventional, low‐fluid‐loss, high‐lime systems in combination with IDCMUL P. In this application, the product barite and drill solids to prevent water‐wet solids; it improves thermal stability, rheological stability, filtration control and emulsion stability; and it improves the fluidʹs resistance to contamination. Concentrations for initial formulations range from 1 to 3 lb/bbl (2.85 to 8.6 kg/m3) when used as a wetting agent, with occasional daily treatments. IDCMUL SBM functions as the primary emulsifier when used in relaxed‐fluid‐loss, lower‐lime systems, in combination with IDCWET additive. In this application, the product forms a stable, water‐in‐oil emulsion and provides a degree of oil‐wetting

IDCMUL-100

Function

IDCMUL 100 is a primary emulsifier used for formulating invert drilling fluids. It will provide high emulsification and some fluid loss control. IDCMUL-100 is commonly used with secondary mud emulsifiers such as IDCMUL P or S.

IDCMUL-101

Function

IDCMUL 101 is a primary emulsifier. Moreover, it aids formulating invert drilling fluids. It will provide high emulsification and some fluid loss control. In addition, secondary mud emulsifiers such as IDCMUL P commonly use this. It provides good emulsification and higher electrical stability with some filtrate control properties.

IDCMUL-102

Function

Additionally, IDC-624 creates a stable emulsified acid package. As a result, it reduces the acid reaction rates at high temperatures. As a result, this allows better acid penetration in deep well acidizing operations.

Furthermore, coupled with an acid or mixed on the fly as needed. The emulsion will break and also provide water-wetting characteristics after acid package neutralization.

IDCMUL-NT

Function

Another Emulsifying and wetting agent with High-Temperature stable invert emulsions, secondary wetting, reduce HPHT filtration, improves thermal stability and resistance to contamination in oil mud systems

IDCMUL-HT

Function

Provides excellent emulsion stability, secondary wetting, HTHP filtration control, high-temperature stability and contamination resistance of oil mud systems

IDCMUL-S-HT

Function

Multifunctional additive serves as secondary emulsifier, wetting agent and HTHP filtration control agent with improved thermal stability in the oil mud system

IDCTHIN

Function

Particularly, it reduces viscosity and gel strength in oil-base mud caused by a high content of colloidal solids, without the need for charging the oil/water ratio.

IDCMOD

Function

Generally, IDCMOD improves cuttings transport in large-diameter or directional wells, especially wells with diameters greater than 8 ½ in. or deviations greater than 25°. Furthermore, it modifies the rheological profile of oil-base muds, increasing their shear-thinning and thixotropic characteristics without using additional clay-based additives.

IDCVIS-OBM

Function

Generally, this provides elevated yield point and gel strength with minimal increase in plastic viscosity thereby minimize the amount of clay in the formulation, and hence, improves LSRV to increase shear thinning, thixotropic characteristics oil base mud.

IDCWET

Function

Power oil wetting products generally used to oil-wet drill solids and weighting agents in oil-based drilling fluids.

To summarise, International Drilling Chemicals partners with major oil and gas companies worldwide. Moreover, we cater to our partners as manufacturers and suppliers in India for oilfield chemicals.